NewPro permaSeal CARE 150 - Professional lacquer sealing
Product description:
NewPro permaSeal CARE 150 is a solvent-based sealing for new and reconditioned lacquered car bodies, with excellent sealing power. The sealing creates a transparent ultra thin coating, which sustainably freshes up the colour and gloss and gives a long lasting water repellency to the paintwork. The water- and soil-repelling sealing with an easy-2-clean-effect enables a mild and easy car wash.
Suitable substrates:
New and reconditioned lacquer surfaces. For reconditioning of used lacquer surfaces we recommend silicone-free lacquer cleaner NewPro permaClean CARE 350
Non-suitable substrates:
Non-lacquered or rough plastic surfaces, rubber parts.
Material base:
Solvent-based composite material with wax additives.
Packaging sizes:
By arrangement.
Storage:
Protect against heat, frost and moisture. Can be stored in original containers at room temperature for at least 24 months.
Application process:
Mix well before use. Apply material evenly and sparingly to partial areas and rub it in with a soft and non-abrasive cloth or with a polishing machine. Leave for about 10 minutes, then buff clean. Please read the detailed direction for use.
Colour:
Milky white liquid.
Viscosity:
< 102 mPa s (DIN 53214).
Consumption:
Approx. 2 – 5 ml / m² (10 – 20 ml per vehicle).
Preparing the surface:
Clean the substrate surface well, it must be dry and free of soilings and dust.
Mixing:
Mix well by shaking or stirring before use.
Preparation:
NewPro permaSeal CARE 150 is a ready-to-use product. Application temperature: 10 – 25 °C. Ensure sufficient air ventilation.
Setting:
The sealing is dry after polishing.
Tool cleaning:
Not applicable/ residual material onto tools or devices can be removed with white spirit.
Touching up and reapplication:
Can be applied to the clean and dry surface as above-mentioned.
Cleaning of treated surfaces:
The sealed paintwork can be cleaned effortlessly using a damp sponge and a mild car shampoo. The sealing will endure several washes in automatic car wash systems. Additional car care programmes (e. g. hot wax or special cleaning programmes) are not required. Do not use steamwash equipment or solvent-based cleaning products.
Protective measurements:
While applying NewPro permaSeal CARE 150 the security and safety procedures recommended in the safety data sheet should be considered as well as the instructions of the Employers Liability Insurance Association for the prevention of accidents. Wash hands after use. Keep out of reach of children. For detailed information see safety data sheet.
Waste management:
See security data sheet and proceed in accordance to the local authorities.