NewPro Nano Wood - the universal protection for untreated wood

Description

NewPro-Nano Wood is an aqueous inorganic-organic coating material for untreated wood based on chemical nanotechnology. Self-organizing anti-adhesive components offer untreated wood surfaces an invisible layer with hydrophobic and oleophobic (water, grease and oil repellent) characteristics.

Range of Application and Use

NewPro-Nano Wood has a wide variety of applications around the house and garden on many untreated open porous, absorbent wood surfaces, such as:

• Untreated wood, such as birch, beech, oak, pine, etc.
• Garden furniture (tropical and teak woods)
• Garden houses, sheds
• Wood fences
• Plywood

NewPro-Nano Wood can also be applied to many other surfaces such as cork.

Product Characteristics

NewPro-Nano Wood offers protected surfaces grease, oil, dirt, grime and water repellent characteristics and is distinguished by its easy to clean properties.

Further characteristics include:

• Breathing activity remains intact.
• Prevents weathering or decomposition of wood surfaces
• Direct applicability
• Removes the fertile foundation for the growth of greens such as algae and moss.
• Easy to apply
• Nanoformed open-porous surfaces
• Fire damp resistant
• Fast drying
• Long lasting protection of surfaces against grease, oil, dirt, grime, water, etc.
• UV-stabile
• Dirt, grime, grease oil and soiling easy to remove with water spray.
• Weather resistant.

Instructions Regarding Use/Application

Surface preparation/pre-cleaning:

All surfaces should be grease, oil and dust particle free, dry and sustainable.

1. As usual, large and rough dirt or soiling and loose particles should be thoroughly removed. For extreme soiling, repeat the steps above.
2. Let the surface completely dry before the application of NewPro-Nano Wood sealant and do not touch with fingers.

Surface Coating/Application:

The surface to be coated must be completely cleaned and grease free prior to the application.

1. Spray NewPro-Nano Wood thickly onto the surface and evenly spread with a brush or roller.
2. Let NewPro-Nano Wood dry until fluid or product remains are no longer visible.

Notice:
NewPro-Nano Wood covers a wide range of applications. For this reason, we recommend that a test be applied to the surface in order to determine the suitability of the product for its intended purpose. The coating should be immediately applied after pre-cleaning and should no longer be touched.
Improvement and New Surface Coatings:
By the abatement of the protective characteristics, repeat the steps described above.
Cleaning of the coated surface:
NewPro-Nano Wood is a permanent protective system. Soiling, dirt and grime, and dry residue can be removed with a moist towel.

Caution:
NewPro-Nano Wood and Stone is not to be applied together with chloric cleaning solutions. There is the possibility of the formation of poisonous vapors.

Mixing Instructions:
NewPro-Nano Wood can be directly applied and is not mixable with water or other substances. A mixture with foreign substances can have a negative effect on the characteristics of the product as well as the durability or lifespan of the product and the coated surface.
Use:

Approximately 100 - 200 ml/m².

This is simply an estimation, which can vary depending upon the absorbency of the surface.
An exact amount of material required should be determined by a test on the intended surface.

Required Conditions for Use/Application

The application and drying requires a surface and area temperature between min. +5 °C and max. + 30 °C. NewPro-Nano Wood and Stone is not to be applied under direct sunlight at temperatures over 25 °C. Do not apply at temperatures under + 5 ºC. During application and drying times, protect the surface coating from rain.

Caution:
NewPro-Nano Wood is not to be applied to surfaces which can reach temperatures over 180°C, otherwise the coating surface layer can become brittle and damaged.

Drying Times:

• +10 °C approximately 6 h
• +20 °C approximately 4 h
• +30 °C approximately 3 h.

The complete protective characteristics of NewPro-Nano Wood occur after 24 hours of drying, depending upon the temperature and the relative humidity.

Delivery Form

Units Per Package:

• 100 ml Nanofluid (sealant).

Further types of packaging and sizes are available upon request.

Color

• Colorless, in a dry condition colorless.

Special Instructions

Transport:

Unlabeled and non-hazardous.

Storage:

At room temperature minimum of 6 months when stored in closed original packaging
Protect against moisture, frost and heat.

Disposal:

Only recycle completely emptied containers or packaging.
Only dispose of the remainder of the product at an officially designated disposal site
Do not dispose of the product in the public sewage or drainage system.

Work Hygiene

Before breaks and at the end working with the product, wash hands thoroughly. Do not eat, drink or smoke during use. Avoid eye and skin contact with the product. If necessary, wear protective clothing.
For further instructions, please refer to the product safety data sheets for this product.

Safety Precautions

Keep away from children. Keep containers sealed tightly closed. In the event of eye contact, immediately flush eyes out with water. In the event of skin contact, wash skin thoroughly with water and soap. If necessary, seek medical advice. Do not smoke during application and use. If swallowed seek immediate medical advice and show the packaging or product label to the treating physician.
NewPro-Nano Wood is not to be applied to surfaces which can reach temperatures over 180°C, otherwise the coating surface layer can become brittle and damaged. NewPro-Nano Wood is not to be applied together with chloric cleaning solutions. There is the possibility of the formation of poisonous vapors.
For further instructions, please refer to the product safety data sheets for this product.

Safety and Protective Measures

The general safety precautions for water solvent materials are to be considered.
Keep away from children. Keep containers sealed tightly closed. In the event of eye contact, immediately flush eyes out with water. In the event of skin contact, wash skin thoroughly with water and soap and seek medical advice. Do not smoke during application and use. If swallowed seek immediate medical advice and show the packaging or product label to the treating physician.

The technical advice regarding the use and application of our products is the result of extensive research and development as well as many years of experience, according to the best of our knowledge. The different kinds of requirements of an object, under varying conditions, make it necessary for the user to check the suitability for the intended purpose. We reserve the right to effectuate changes, which serve to affect the technical advance or improvement of our product.

For further instructions, please refer to the product safety data sheets for this product.