NewPro NC Ceram RAK 300 barrier properties protect the micro-porosity of polished porcelain stoneware

NewPro NC Ceram RAK 300 barrier properties protect the micro-porosity of polished porcelain stoneware.
Due to the nature of manufacture, polished or semi-polished porcelain stoneware is highly susceptible to dirt due to the opening of the surface during the polishing process. Previously concealed air pockets are now exposed, enabling dirt and paint particles to adhere. This causes almost irreversible damage: Tiles have to be stripped with a diamond grinder for repair.

NewPro NC Ceram RAK 300 reliably prevents the adhesion of dirt and paint particles. The "permanent marker test" is normally used to validate the performance: If the permanent marker can be completely removed with ethanol, the tile is protected.
Through the intelligent arrangement of hybrid (organic and inorganic) structures, NewPro NC Ceram RAK 300 constitutes concept.

Specifications

Chemical basis: modified silicon dioxide
Layer thickness: approx. 300 nm
Water resistance: approx. 9° (20μl)
Oil resistance: no
Slip angle: < 25°
Temperature stability: 150°C permanent
Chemical stability: between pH 1 and pH 13
Weather resistance: 3500 h pursuant to ISO 11507 A
Durability (mechanical): > 100,000 cycles pursuant to ISO 11998
Salt-water resistant: yes
Transparency: 100%
Storage stability: 2 years
Temperature sensitivity: -3°C to 30°C
Consumption: 5 ml/m²

Application:

drops of the liquid are applied either on a slightly absorbent cloth or directly to the substrate. Polish until the surface is dry and free of visible streaks. The coating is waterproof after 12 hours and fully cured after 24 hours.

NewPro NC Ceram RAK 300 is available in only one formulation. The product is based on non-flammable solvents. It is a non-hazardous material according to ADR and IATA.

This complex technology does not permit dilutions.
Please observe the relevant safety data sheet when using NewPro NC Ceram RAK 300