Single Component Finishing Coat
NewProLUX Lack
Description:
Single Component, sea water resistant high-gloss finishing coat based on high-quality alkyd resins. Quick drying. Suitable for above sea level areas and interior surfaces.
Information:
Low flame spread certificate issued by TÜV Nord and approved for use on sea-going vessels in accordance with EU-Directive 96/98/EG.
Volume- Solids: approx. 45-50 %
Density g/ml: approx. 1,0 - 1,1
Dry Film Thickness: 40 μm
Theoretical Coverage: 11, 25 m²/l
Packing:
- 10 Litres
- 5 Litres and 25 kg-Container on request!
Colour Shade (Article-Number):
Colour Tone - 03001
Super white - 93350
Further colour shades are available on request.
Thinners:
03069-00070 (for a smooth surface)
03089-00580 (for improved drying abilities)
NewProHOLD Paint
Description:
Quick drying hold paint with excellent penetrating properties on poorly de-rusted surfaces. Forms a hard and tough film after drying. Suitable for contact with grain cargoes.
Volume - Solids: approx. 44%
Density g/ml: approx.1,23
Dry Film Thickness: 25 μm
Theoretical Coverage: 17, 6 m²/l
Packing:
- 10 Litres
Colour Shade (Article-Number):
Colour Tone - 53011
Aluminium - 91300
Pebble grey - 73520
Red-brown - 81300
Thinners: 03069-00070
NewPro Penetrating Varnish
Description:
Classical hard-drying penetrating oil for the protection of corroded and hardly accessible internal steel surfaces. E. g. internal walls, bilges and chain lockers.
Volume- Solids: approx. 52 %
Density g/ml: approx. 0,94
Dry Film Thickness: 40 μm
Theoretical Coverage: 13, 0 m²/l
Packing: 10 Litres
Smaller and larger containers are available on request!
Colour Shade (Article-Number):
Clear, lightly brownish - 03011-00220
Thinners:
03069-00070
NewPro TEMP matt
Description:
Silverlight bronze for temperature loads in external and internal areas. Wipe resistent!
For dry heat up to 650°C
Volume- Solids: approx. 52 %
Density g/ml approx.1, 07
Dry Film Thickness: 30 μm
Theoretical Coverage: 12, 4 m²/l
Packing:
- 10 Litres
Colour Shade (Article-Number):
silver - 63014-9006
Thinners: 03089-00580
NewProTHERM +600
Description:
Aluminium finish based on polysiloxane resin for interior and exterior use.
For the following temperature ranges (dry heat):
- prolonged exposure > 500°C
- peak loads max.. 650°C
Information:
Colour shade similar to RAL 9006; For use on sandblasted surfaces resp. primed accordingly. Temperature durability is achieved after first heating to at least 200°C for 30 minutes. Wipe resistant!
Volume- Solids: approx. 38%
Density g/ml: approx.1,15
Dry Film Thickness: 40 μm
Theoretical Coverage: 9, 5 m²/l
Packing:
- 10 Litres
Colour Shade (Article-Number):
White-Aluminium - 90663039-95890
Thinners: 03089-00580
(for cleaning only)