NewPro-GET 210 Graffiti Remover- The Graffiti Remover for Textile Surfaces
Description
NewPro-GET 210 Graffiti Remover is a specially developed remover for the thorough removal of marker writings and graffiti spray on textile surfaces.
Range of Application and Use
NewPro-GET 210 Graffiti Remover can be used as an environmentally safe remover of marker writings and graffiti spray on textile surfaces.
NewPro-GET 210 Graffiti Remover can be applied to the following surfaces:
- Interior seat upholstery on public transportation (e.g. buses and train wagons)
- Clothing
- Shoes
- Textile surfaces.
Product Characteristics/Features
NewPro-GET 210 Graffiti Remover is especially distinguished by its gentle and environmentally safe removal of graffiti and markings as well as a high productivity.
Further properties include:
- Odorless
- Inhibits repeated soiling or staining
- Immediately effective
- Easy-to-apply
- No residue moisture – textile surfaces can immediately be used again.
- Versatile use and application.
Mixing Instructions
NewPro GET210 graffiti remover is delivered ready-to-use and not to be diluted or mixed with water or other foreign material. Any intermixture will affect the cleaning properties adversely.
Processing
1. apply NewPro GET210 graffiti remover on surface
2. wipe off soiling with clean cloth or sponge
The surface cleaned with NewPro GET210 stays dry and can be used right after application.
Note: NewPro GET210 graffiti remover covers a wide application area. Therefore we advise to test the application on a test area. For further safety advice see material data safety sheet.
Consumption:
Depends on degree of soiling and the surface structure of the textiles.
The exact consumption has to be determined by a test application.
Processing Conditions
Processing can be done at surface and environment temperatures between min. + 5 °C and max. + 30 °C. NewPro GET210 graffiti remover must not be applied at temperatures above 25°C and not at direct direct solar radiation.
Residence time:
No residence time necessary
Depends on temperature and relative humidity
Warning notice:
NewPro GET210 graffiti remover must not dry on surfaces.
Cleaning of tools:
No cleaning necessary. If needed, clean with clear water.
Delivery Form
Packaging unit:
- 1000 ml concentrate. Other packaging units, packaging sizes and color on demand.
Color:
colorless
Other Notes
Transport:
- No labeling, no hazardous material
Storage:
At room temperature min. 12 months in tightly closed original container.
Protect against frost, moisture and heat
Work Hygiene
Before breaks and at the end working with the product, wash hands thoroughly. Do not eat, drink or smoke during use. Avoid eye and skin contact with the product. If necessary, wear protective clothing.
Special Notices
Graffiti removal: Contamination or soiling is to be removed with a solvent (Acetone) and an absorbent towel. Please pay careful attention to the corresponding safety precautions.
Safety Precautions
Keep away from children. Keep containers sealed tightly closed. In the event of eye contact, immediately flush eyes out with water. In the event of skin contact, wash skin thoroughly with water and soap. Do not smoke during application and use.
If swallowed seek immediate medical advice and show the packaging or product label to the treating physician.
For further safety precautions, please refer to the safety product sheets of the product.
Safety and Protective Measures
The general safety precautions for water solvent materials are to be considered.
The technical advice regarding the use and application of our products is the result of extensive research and development as well as many years of experience, according to the best of our knowledge. The different kinds of requirements of an object, under varying conditions, make it necessary for the user to check the suitability for the intended purpose. We reserve the right to effectuate changes, which serve to affect the technical advance or improvement of our product.
The product is only designed for commercial use and application!