NewPro NC Flex Antifog Cleaner with Protection for Glass and Plastic with an ultra-hydrophilic film
NewPro NC Flex Antifog is a cleaner for weekly or monthly use. It gives non-absorbent surfaces such as glass or plastic a reliable anti-misting performance, which prevents condensation.
NewPro NC Flex Antifog creates an ultra-hydrophilic film on the cleaned surface, which allows the finest droplets of water vapour to be widely dispersed across the surface.
After cleaning a protective film remains that is not chemically bonded to the surface. This must be re-applied after mechanical abrasion or being subjected to large volumes of water.
Through the intelligent arrangement of hybrid (organic and inorganic) structures, NewPro NC Flex Antifog constitutes concept.
Specifications![NewPro NC Flex Antifog Reinigungsmittel und Schutz NewPro NC Flex Antifog Reinigungsmittel und Schutz](/images/21_antifognc.png)
Chemical basis: modified silicon dioxide
Layer thickness: approx. 100 -120 nm
Water absorbency: 1°-5° (20μl)
Temperature stability: 100°C permanent,
Chemical stability: no
Weather resistance: no
Durability (mechanical): no
Salt-water resistant: no
Transparency: 100%
Storage stability: 2 years
Temperature sensitivity: -3°C to 30°C
Consumption: 5-15 ml/m2
Application:
drops of the liquid are applied either on a slightly absorbent cloth or directly to the substrate. Clean the substrate until free of dirt particles. The anti-mist effect is only maintained through ongoing application of NewPro NC Flex Antifog to the clean surface. The surface should not be buffed but left to air-dry as a film.
NewPro NC Flex Antifog is available as an ethanol or water-based product. The water-based version should be buffed. The product is available as a liquid concentrate, dilution rate 1:299 (ethanol-based) or 1:9 (water-based).
Please observe the relevant safety data sheet when using NewPro NC Flex Antifog.