NewPro-GS 207 Graffiti Protection System for Absorbent Stone surfaces

Product Description

NewPro-GS 207 Graffiti Protection System is a sacrificial layer to protect Absorbent Stone surfaces, which prevents the penetration of graffiti contamination.

Range of Application and Use

NewPro-GS 207 Graffiti Protection System is applied as a protective film (temporary separable layer) against graffiti on absorbent surfaces such as:

• Brick
• Cement and chalk plaster
• Clinker
• Sand stone
• Thermo plaster.

Product Characteristics

NewPro-GS 207 is a sacrificial layer based on water vapor-permeable Heterosacharyden and micro paraffins. Paints, contamination or soiling stick to the sacrificial layer.

Further characteristics include: Durability of the protective effect under normal weather conditions lasts up to 5 years

• Easy to use
• Firedamp solid
• UV-stabile
• Weather resistant
• Water proof/repellent (protects the surface from moistures).

Technical Data

Adhesive basis:

• Microwax.

Specific weight:

• Approximately 0. 89g/cm³.

Instructions Regarding Use/Application

Surface preparation: All surfaces must be sustainable, clean and free from lose particles or particles which would impair adhesion, as the area of application requires.

Mixing Instructions: Mix the contents of the component A (powder) with 9 liters of water free of clumps. Subsequently, mix in component B (1 liter bottle). Let the finished mixture stand for 10 to 25 minutes.

Application: Contaminated or soiled surfaces can be simply cleaned with hot water (min. +75°C/ max. +90°C) and a high pressure cleaner (50 – 80 Bar). For the removal in the indoors/interior, where hot water and steam cannot be applied the cleaning solvent NewPro-GE 900 can be used. On appropriate surfaces, NewPro-GS 207 Graffiti Protection System can be applied using a spraying device. Two evenly applied layers or coats should be appliedBecause the NewPro-GS 207 Graffiti Protection System is a temporary protective film, the cleaned surface must be protected subsequently with NewPro-GS 207 Graffiti Protection System.

Machine application: NewPro-GS 207 Graffiti Protection System can be applied using a standard airless spraying device.

Use:

• Approximately 80 to 250 ml per m².

This is only an estimation, which depends on the actual absorbency of the surface, which may vary. An exact amount of material needed should be determined by applying a test coating to the surface of the object.

Required Conditions for Use/Application

The application and drying requires a surface and area temperature between min. +5°C and max. +30°C.

Drying times:

• At approximately 20°C and 80 % humidity depending on the thickness of the layer
• Ready for new coat exterior Approximately 1 hr
• Ready for new coat interior Approximately 15 to 20 min.

During application and drying times, protect the surface coating from rain.

Cleaning of tools: * In freshly used condition, clean with water.

Form of Delivery

Units Per Package:

• Units Per Package S with 10 x 1 Liter.

Special Instructions

Transport:

• Unlabeled and non-hazardous.

Storage:

• Cool, frost-protected, in original closed package, product has a shelf life of approximately 1 year.

Work Hygiene

Before breaks and at the end working with the product, wash hands thoroughly. Do not eat, drink or smoke during use. Avoid eye and skin contact with the product. If necessary, wear protective clothing. For further safety precautions, please refer to the safety product sheets of the product.

Safety and Protective Measures

The general safety precautions for water solvent materials are to be considered. The technical advice regarding the use and application of our products is the result of extensive research and development as well as many years of experience, according to the best of our knowledge. The different kinds of requirements of an object, under varying conditions, make it necessary for the user to check the suitability for the intended purpose. We reserve the right to effectuate changes, which serve to affect the technical advance or improvement of our product. For further instructions, please refer to the product safety data sheets for this product. The product is only designed for commercial use and application!