NewPro PermaProtect NA 412 With Anti-Adhesive Effect For Zinc, Copper, And Metals
Product is replaced with NewPro NanoDuration NC or NewPro Long Term Coating RK CCS. Please check if product is suitable for the intended purpose.
Product Description
The coating material produces a mechanically resistant coating with a high asset liability on light metals. The surface system generates matte coating with good abrasion resistance, and good resistance to high temperatures (up to 450C) and corrosive media, such as acidic and alkaline condensates.
The surface does not need chromate coating. Product is chromate and lead free in terms of hazardous substances ordinance. Consumption depends on surface coarseness and application method. The hardened coating is inoffensive in terms of food law.
Main areas of application
Main application areas: stainless steel, copper, brass, aluminum and magnesia.
Material basis: Polyestermodified Polysiloxansystem
Color: Colorless to yellowish transparent
PH-Values: Neutral
Package Sizes:
- 5-L-PE Canister 5 kg.
Further package/container sizes available upon request
Storage
Minimum of 6 months at a temperature from 5 degrees Celsius to 20 degrees Celsius when stored in tightly sealed original container. Protect against frost and higher temperatures. In the event of storage beyond expiration date, test the material prior to use. Tightly air seal opened containers to preserve product life. Ensure sufficient ventilation in product storage areas. Preparation not necessary – can be used as delivered
Application
Suggested spraying parameters: Spray with air pressure of approx. 2 bar, nozzle <1mm. Apply in several thin layers with little product supply and fine drop image.
Application temperature
Product, environment and surface: Min. +5°C, max + 35°C. Thermal hardening for 30 min. up to 220°C.
Protective Measures
During application and use, carefully follow the instructions, safety advice and the pertinent safety and accident instructions of appropriate occupational and trade associations. For further detailed instructions, see safety data sheets.
Cleaning of Tools:
Clean tools thoroughly with thinner and towel.
Improvement and Second Coatings:
Mechanically through abrasive finishing (ie., sandpaper) or through emplacement in a bath of lime potash and 2-Propanol.
Disposal:
Dispose of material residues according to local and/or state regulation for paints and lacquers.
Technical Data
Salt Spray: (DIN EN ISO 9227 NSS): 100h
Weathering: (DIN RN ISO 492-3: 4h UV-B 60°C: 250 h4 h water condensation 50°C):
Climate change: DBL 7906: 15 min 23°C; 4 h-30°C: 10 cycles 15 min 23°C; 4h 80°C: 30 min 40°C 98% rel humidity. )
Acid / Base resistance: pH 1 bis pH 12
Pencil Hardness: H (stainless steel), B(aluminum)
Taber test: (Cs 10 F rolle, 1000 rotations): 7 mg
Temperature resistance: continuous up to 300°C
Approval: Certification for food products in terms of EU-ordinance 1935/2004
Surface energie: 28mN/m
