NewPro OS Special Paint S
Fast drying performance coatings for machine and plant construction and for anti-corrosive applications.
Substrates / surface preparation:
Substrates must be absolutely clean, dry and free of grease and dust.
- structural steel, sheet steel, cast iron, stainless steel, light / non ferrous metal:
suitable primers
- wood / wooden composite, mineral substrate:
suitable pore-filling primers
- plastics, old coatings, third party primers:
according to preliminary tests in own
(recommended) primer (examples):
NewPro Z single component primer (color shade) containing zinc phosphate
Article no.: 7038-xxxx
HANDLING AND APPLICATION
Storage stability:
At least 6 months when both components are separately stored in original, un-opened packages at temperatures between 15 and 25°C (60 - 85°F).
Storage temperatures above 40° C / 104° F should be avoided, because reaction of the binder may change the hue and viscosity of the material. Opened containers must be sealed well and used up as soon as possible.
Thinner: NewPro Special thinner Article no.: 0089-00580
Application:
Before application, the color shade and the compatibility with the substrate should be tested. Object-, material and ambient temperature should not be below 15° C (49° F) and not above 25° C (77° F) and must be at least 5° above the dew point.
These products are preferably applied by spraying methods. Before processing the material must be adjusted to the viscosity for the respective application method.
Viscosity: | Nozzle diameter | Spray pressure | |||
(mm) | (mil) | (bar) | (psi) | ||
Airless spraying | not diluted | 0.3 - 0.5 | 12 – 20 | 50 - 100 | 725 - 1450 |
Cup gun | not diluted | > 1.6 | ---- | > 1.8 | > 26 |
Brush/roller | To avoid surface finish faults (differences in gloss depending on working direction), apply undiluted material and smoothe it in accordance with good professional practice. | ||||
All values given are just examples, the actual settings are process-and systemdependent
theoretical spreading rate:
at 40 microns (1.6mils) dry film thickness 8.4 m²/kg = 9.4 m²/l
= 110 microns (4.4 mils) wet film = 120 g/m² (0.37 lbs/yd²) 4.6yd²/lb = 51.2 yd²/gal
at 60 microns (2.4mils) dry film thickness 5,6 m²/kg = 6.3 m²/l
= 90 microns (3.7 mils) wet film = 150 g/m² (0.28 lbs/yd²) 3.1 yd²/lb = 34,1 yd²/gal
drying time: (at standard climate 23°C (73°F) / 50 % rel. humidity and adequate air circulation)
dust-dry approx. 40 minutes
touch dry approx. 90 minutes
splash-/rain-water proof approx. 16 - 24 hours
cured approx. 03 days
TECHNICAL DATA
(All values are average values - depending on shade of colour)
density: 1120 kg/m³
density (solids): 1540 kg/m³
Solids: 52 Wt-%
38 Vol-%
VOC- content: 48,1 Wt-%
classification to 2004/42/EC: VOC-values: = 537 g / l
base of binder: quick drying special alkyd
color shades:
many color shades(except fluorescent, pearl luster and metallic colors) can be produced subject to the minimum production quantities.
viscosity on supply: slightly pseudoplastic, flow time DIN 53211: 70 – 100 s
FILM CHARACTERISTICS
Gloss (EN ISO 2813, 60° viewing angle):
(semi) gloss gloss value > 60 Article no.: 0007-xxxx / 1007-xxxx
satin gloss value 50 ± 10 Article no.: 4007-xxxx
semi matt gloss value 30 ± 10 Article no.: 5007-xxxx
matt gloss value < 20 Article no.: 6007-xxxx
stability (without top coat):
weather: o
solvents -
dripping water: o
fuels: -
aqueous cleaning agents: o
lubricants: o
(partial) immersion in water - temperature load: > 120°C />248°F
overcoatable according to preliminary tests in own responsibility
DELIVERY AND SHIPPING AMOUNTS
(subject to minimum order quantity):
1 drum with 30 kg = 27,5 ± 1,4 l 66,14 lb = 05,9 ± 0,3 gal
1 pail with 10 l = 11,2 ± 0,5 kg 2,20 gal = 24,6 ± 1,1 lbs
other amounts on request. Not all color shades are available in the container sizes cited.
HEALTH AND SAFETY / STORAGE / ENVIRONMENTAL DATA
Observe the universally applicable guidelines when handling and storing coating materials. Observe all hazard warnings and safety advice printed on the containers. For more details, please refer to the Material Safety Data Sheets.